Kobelco Excavator Final Drive Replacement: SK Series Travel Gearbox Guide

Views: 0     Author: Site Editor     Publish Time: 2026-09-16      Origin: Site

Introduction

Kobelco excavators — from compact SK60 models to the heavy SK485 class — are trusted across mining, quarrying, and heavy construction. But when a final drive fails, finding a reliable aftermarket replacement quickly is what separates a short outage from a long one.

This guide covers Kobelco final drive replacement across the SK series: the part numbers that matter, how to confirm fitment, and where to source a certified aftermarket travel gearbox.

Kobelco Final Drive Part Numbers by Model

BN Gears stocks and manufactures travel reduction gearboxes for a wide range of Kobelco SK-series excavators:

OEM Part No.Compatible ModelsBN Gears Aftermarket
YN15V00037F2, YN15V00051F1SK200-8YN15V00037F2 SK200-8 Final Drive →
LC15V00023F1SK350-8, SK330-8LC15V00023F1 SK350-8 Final Drive →
LS53D00007F1SK420-8, SK460-8, SK485-8, SK485-9LS53D00007F1 SK420-8 Final Drive →
(Multi-model)SK200-5SK200-5 Final Drive →
(Multi-model)SK60, SK100, SK200, SK260, SK330, SK350SK Series Final Drive Gearbox →

Browse all Kobelco final drives →

Match Your Kobelco Model — Not Just the Series

Kobelco part numbers are model-specific. The SK200-8 uses the YN15V00037F2 / YN15V00051F1 assembly, while the SK350-8 and SK330-8 share the LC15V00023F1 — and the large SK420-8 to SK485-9 class runs the LS53D00007F1 (BN stock code 9202400). Always confirm the OEM part number on your existing gearbox housing, the sprocket hole count, and the frame hole count before ordering. Cross-applying a part number from an adjacent model will result in a fitment failure.

How to Order the Right Kobelco Final Drive

  1. Provide the full model name and serial number (e.g., SK350-8)

  2. Include the OEM part number from the existing gearbox (e.g., LC15V00023F1)

  3. Confirm sprocket and frame hole counts

  4. Specify painted or unpainted finish and delivery terms

Kobelco Final Drive Maintenance Tips

  • Check gear oil level every 250 operating hours

  • Change gear oil every 1,000 hours (or per manufacturer spec)

  • Inspect floating seals daily — mud and debris accelerate seal wear in mining conditions

  • Listen for grinding or whining noise during travel and investigate early

Why Kobelco Owners Choose BN Gears

  • ISO 9001:2015 certified manufacturing since 2000

  • 18,000 m² factory in Jiangmen, China — in-house heat treatment and machining

  • Case-hardened forged alloy steel gears, same engineering standards as OEM

  • 12,000+ parts covering 600+ construction machinery models

  • In-stock units processed and packed within 4–7 days, shipped worldwide

Get a quote for your Kobelco model →

Tel: +86-750-6318209 6318263
Whatsapp: +8613672844386

We are the high end excavator parts suppliers and manufacturer, provides aftermarket excavator parts, mini excavator parts, final drive, swing drive, travel gearbox, swing gearbox, travel motor, trench cutter gearbox, Winch gearbox ect.

Products

Copyright © 2026 HONGXIANG MACHINERY CO. LTD., | All Rights Reserved 丨Sitemap